It is an acrylic copolymer emulsion based, white pigmented, ﬁne textured interior and exterior primer paint.
It increases the covering of the topcoat and provides better adhesion to the surface. Thanks to its thin texture, the premium silicone exterior, premium silicone interior, and water-based paints such as silk and silk mat create an ideal surface for the entire COLOR COVER (GOLD) series. Reduces the suction power of the surface, saves paint and time.
SURFACES TO BE APPLIED
RENKLİ KİRPİ PROFESSIONAL PRIMER is applied on concrete, gross concrete, raw plastered surfaces, mdf, betopan, osb, brick, self-supporting old painted (water-solvent based) and putty applied surfaces.
After the application surfaces are cleaned from all kinds of mold oil, dirt, dust, loose layers, priming is done. Before transitioning from synthetic painted surfaces to water-based system and in İpekmat Semi-gloss water-based systems (before primer application), the surfaces must be matted with sandpaper. The setting times of cement based plaster and repair materials must be observed. Care should be taken to ensure that the surface temperature is between + 5 ° C and + 30 ° C during application. The surface must be protected from frost during primer application and drying periods. Applications should be done in one coat by brush, roller or airless (spraying). After the working, equipments need to wash with water. Note: Wide transparent duct tape should be adhered on new plastered surfaces. If the plaster particles are intense, priming should be started after scraping, sanding or mechanical cleaning. Our products should be applied on the substructure surfaces made in accordance with the General Technical Speciﬁcations of Construction No. 26568 dated 30.06.2007. In Airless Spray: Pressure: 120-140 bar Nozzle Angle: 50 ° Nozzle Size (inch): 0.013 ”
REDUCE/THIN A PAINT
It is recommended to be applied in a single coat by thinning 20-25% with clean water in brush and roller applications.
Production date and batch code is on the bucket Valid for 2 years from the date of manufacture:
Drying time is 6 hours in applications on water-based paint, 24 hours in applications on solvent-based paint (higher relative humidity and low temperature drying time may be longer).
Depending on the type, absorbency and structure of the application surface, 10-15 m² of area can be primed in one coat with 1 KG. A controlled sample study should be carried out for precise consumption.
Can be stored for 3 years in its unopened package, protected from frost and direct sunlight in a cool and dry place. Close the lid of the package so that it does not get air immediately after use.
P101 If medical advice is needed, keep the container or label. P102 Keep out of the reach of children. P103 Read the label before using. P261 Avoid breathing dust / fume / gas / mist / vapors / spray. P280 Wear protective gloves / protective clothing / eye protection / face protection. P321 Special intervention required (see label) P363 Wash contaminated clothing before reuse. P333 + P313 If skin irritation or itching occurs: Get medical attention P501 Dispose of contents / container in accordance with local / regional / national / international legislation.
Since this technical sheet is normally prepared on the basis of laboratory data, consult technical staﬀ for the details that are not suﬃcient above. Otherwise, errors that may arise as a result of lack of information do not impose any responsibility on the manufacturer. The right to change this information is reserved by our company. If necessary, you can ﬁnd detailed information about the health, safety, transportation risks and precautions of the products from the Material Safety Data Sheet.